REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT BODY GASKET LH


    1. A01X9J5

      Remove the rear combination light body gasket LH.

      Note

      The gasket must not be reused.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01X7FQE03
      Text in Illustration
      *a Matchmark
      *b Unlock Position Mark

      Turn the bulb socket counter clockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. A01X12Y

      Remove the rear turn signal light bulb from the bulb socket.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. A01X3D1

      Detach the connector and wire harness clamp to remove the rear combination light socket and wire sub-assembly LH.