REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT COVER LH


    1. A01X9ZJ

      Using moulding remover B, detach the 5 claws and remove the rear combination light cover LH.

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Note

    If the rear combination light assembly LH has removed, replace the rear combination light body gasket LH with a new one.


    1. A01X7XN

      Put protective tape around the rear combination light assembly LH.

      Text in Illustration
      B001YA8 Protective Tape

    2. Remove the 2 bolts.

    3. Pull the rear combination light assembly LH toward the rear of the vehicle to detach the 2 pins and 2 guides to remove it.

    4. Disconnect the connector.