REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01X4C3E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, detach the 6 claws and remove the 2 cover.

    2. A01X1QHE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear combination light assembly LH.

    3. Remove the 2 bolts.

    4. Detach the 2 clips and remove the rear combination light assembly LH.

    5. Disconnect the connector.

  2. REMOVE REAR COMBINATION LIGHT GASKET LH


    1. Remove the rear combination light gasket LH from the rear combination light lens and body LH.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01XAR0

      Detach the clamp.

    2. Turn the socket in the direction indicated by the arrow in the illustration and remove the socket and rear turn signal light bulb.

    3. Remove the rear turn signal light bulb from the socket.