HIGH MOUNTED STOP LIGHT ASSEMBLY(for Double Swing Out Type) INSPECTION

PROCEDURE


  1. INSPECT CENTER STOP LIGHT ASSEMBLY


    1. A01X047E02
      Text in Illustration
      *a

      Component without harness connected

      (Center Stop Light Assembly)

      Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 2 (E)

      		 LED illuminates

      If the result is not as specified, replace the center stop light assembly.