HEADLIGHT DIMMER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE SPIRAL CABLE


    1. Remove the spiral cable Click here.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

    Click here

  4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B001WL3E01
      Text in Illustration
      *A for Clamp Type
      *B for Press Fit Type

      for clamp Type:


      1. Disconnect the connector.

      2. While loosening the band clamp as shown in the illustration, detach the claw to remove the dimmer switch.

    2. for Press Fit Type:


      1. Disconnect the connector.

      2. Pull the headlight dimmer switch toward the seat to detach the 2 claws and remove it.