REAR FOG LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER

    for Double Swing Out Type:

    Click here

    for Standard:

    Click here

    w/ Pintle Hook:

    Click here

  2. REMOVE REAR FOG LIGHT ASSEMBLY LH


    1. A01X66Y

      for Double Swing Out Type:


      1. Disconnect the connector.

      2. Remove the 2 nuts.

      3. Detach the claw and remove the rear fog light assembly LH.

    2. A01X109

      except Double Swing Out Type:


      1. Disconnect the connector and detach the wire harness clamp.

      2. Remove the 3 screws and rear fog light assembly LH.