FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH


    1. A01X5T2E03
      Text in Illustration
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → B5-2 (B)

      Battery negative (-) → B5-1 (E)

      		 Illuminates

      If the result is not specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH


    1. A01X13IE03
      Text in Illustration
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → B6-2 (B)

      Battery negative (-) → B6-1 (E)

      		 Illuminates

      If the result is not specified, replace the fog light assembly RH.