HEADLIGHT ASSEMBLY(for Halogen Headlight and LED Headlight) REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Make sure that the headlight assembly is not damaged.

PROCEDURE


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH


    1. A01X5JT

      Cut off the shaded area in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01X9AT

      Install the upper headlight protector retainer LH with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH


    1. A01X3UE

      Cut off the shaded area in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01X242

      Install the lower headlight protector retainer LH with the 2 screws.

  3. INSTALL UPPER HEADLIGHT LH PROTECTOR RETAINER LH


    1. A01X7KU

      Cut off the shaded area in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight LH protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01X1LO

      Install the upper headlight LH protector retainer LH with the 2 screws.

  4. INSTALL LOWER HEADLIGHT LH PROTECTOR RETAINER LH


    1. A01WYYW

      Cut off the shaded area in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight LH protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01X9M0

      Install the lower headlight LH protector retainer LH with the 2 screws.