REAR FOG LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR FOG LIGHT ASSEMBLY LH


    1. except Double Swing Out Type:


      1. Install the rear fog light assembly LH with the 3 screws.

      2. Connector the connector and attach the wire harness clamp.

    2. for Double Swing Out Type:


      1. Attach the claw to install the rear fog light assembly LH.

      2. Install the 2 nuts.

      3. Connector the connector.

  2. INSTALL REAR BUMPER

    for Double Swing Out Type:

    Click here

    for Standard:

    Click here

    w/ Pintle Hook:

    Click here