HEADLIGHT ASSEMBLY(for Halogen Headlight) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)


    1. A01X339E01

      Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.

    2. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.

    3. Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.

    4. Connect the connector.

  2. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)


    1. A01X9A5

      Install the front turn signal light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  3. INSTALL NO. 1 HEADLIGHT BULB (w/ Projector Headlight)


    1. A01X4VT

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 1 headlight bulb.

      Note

      Do not touch the glass part of the No. 1 headlight bulb glass.

    2. Connect the connector.

  4. INSTALL NO. 2 HEADLIGHT BULB (w/ Projector Headlight)


    1. A01X0X2

      Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb glass.

    2. Connect the connector.

  5. INSTALL HEADLIGHT GASKET (w/ Projector Headlight)


    1. Install a new headlight gasket to the No. 1 headlight cover.

  6. INSTALL NO. 1 HEADLIGHT COVER (w/ Projector Headlight)


    1. A01X1VR

      Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration to install the No. 1 headlight cover to the headlight unit LH.

  7. INSTALL HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)


    1. A01X8QLE01

      Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.

    2. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.

    3. Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.

  8. INSTALL CLEARANCE LIGHT BULB (w/o Projector Headlight)


    1. A01X1SU

      Install the clearance light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  9. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)


    1. A01X3UC

      Install the front turn signal light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  10. INSTALL NO. 2 HEADLIGHT BULB (w/o Projector Headlight)


    1. A01X7VC

      Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb glass.

  11. INSTALL NO. 1 HEADLIGHT BULB (w/o Projector Headlight)


    1. A01X3PX

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 1 headlight bulb.

      Note

      Do not touch the glass part of the No. 1 headlight bulb glass.