RAIN SENSOR REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE RAIN SENSOR COVER

   
   
   1. 

      Slide the rain sensor cover as shown in the illustration and detach the 2 guides.

   2. 

      Release the stopper by pulling it down.

      Table 1. Text in Illustration

      *a	Stopper
      	Unlock
      	Remove

   3. Remove the rain sensor with rain sensor cover as shown in the illustration.

   4. 

      Detach the 2 claws and remove the rain sensor cover.

2. Click here

   REMOVE RAIN SENSOR

   
   
   1. 

      Disconnect the connector and remove the rain sensor.

3. Click here

   CLEAN WINDSHIELD GLASS

   Tip:
   

   • Rain sensor tape is reusable. Only replace the rain sensor tape if it is damaged or contaminated.

   • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.

   • If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.