WIPER ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY


    1. Attach the guide and install the windshield wiper relay assembly with the screw.

    2. Connect the connector.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB

    Click here

  4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  8. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  9. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  11. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.