HEADLIGHT CLEANER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  3. REMOVE SIDE STEP ASSEMBLY LH

    Click here

  4. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

    Click here

  5. REMOVE FRONT FENDER LINER LH

    Click here

  6. DRAIN WASHER FLUID

    Click here

  7. REMOVE WASHER INLET SUB-ASSEMBLY

    Click here

  8. REMOVE WINDSHIELD WASHER JAR ASSEMBLY

    Click here

  9. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the connector.

    2. A01X9T1

      Remove the headlight cleaner motor and pump assembly together with the gasket in the direction shown in the illustration.

    3. A01X0MT

      Loosen the clip and disconnect the joint hose.