HEADLIGHT CLEANER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  2. REMOVE SIDE STEP ASSEMBLY LH

    Click here

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

    Click here

  4. REMOVE FRONT FENDER LINER LH

    Click here

  5. DRAIN WASHER FLUID

    Click here

  6. REMOVE WASHER INLET SUB-ASSEMBLY

    Click here

  7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. A01WYYNE02

      Detach the clamp.

    2. Disconnect the 2 connectors.

    3. Disconnect the headlight cleaner hose.

    4. A01XAQG

      Remove the 4 bolts. Then remove the windshield washer jar and pump.

  8. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the connector.

    2. A01X9T1

      Remove the headlight cleaner motor and pump assembly together with the gasket in the direction shown in the illustration.