HEADLIGHT CLEANER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01X6NYE01
      *1 Component without harness connected: (Headlight Cleaner Switch Assembly)

      Remove the headlight cleaner switch assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      5 (L) - 8 (B) on Below 1 Ω
      off 10 kΩ or higher

      If the result is not as specified, replace the headlight cleaner switch assembly.