LIGHTING SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   

   NEXT

2. INSPECT BATTERY VOLTAGE

   Standard Voltage
   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   Result
   Proceed to NEXT

   
   

   NEXT

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

   
   

   1. Use the GTS to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to CAN DTC is not output A CAN DTC is output (for LHD with Central Gateway ECU) B CAN DTC is output (for LHD without Central Gateway ECU) C CAN DTC is output (for RHD with Central Gateway ECU) D CAN DTC is output (for RHD without Central Gateway ECU) E

   
   

   B

   GO TO CAN COMMUNICATION SYSTEM Click here

   C

   GO TO CAN COMMUNICATION SYSTEM Click here

   D

   GO TO CAN COMMUNICATION SYSTEM Click here

   E

   GO TO CAN COMMUNICATION SYSTEM Click here

   A

4. CHECK FOR DTC*

   
   

   1. Clear the DTC.

      Click here

   2. Recheck for DTC.

      Click here

      Result
      Result Proceed to DTC is not output A DTC is output B

   
   

   B

   GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

   A

5. PROBLEM SYMPTOMS TABLE

   Result
   Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B

   
   

   B

   GO TO STEP 7 Click here

   A

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

   
   

   1. Operation Check.

      Click here

   2. Terminals of ECU.

      Click here

   3. Data List / Active Test.

      Click here

      Result
      Proceed to NEXT

   
   

   NEXT

7. ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   

   NEXT

8. CONFIRMATION TEST

   Result
   Proceed to NEXT

   
   

   NEXT

   END