WASHER NOZZLE(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH and RH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  4. REMOVE FRONT FENDER MAIN SEAL LH

    Click here

  5. REMOVE FRONT FENDER MAIN SEAL RH

    Click here

  6. REMOVE FRONT WIPER ARM HEAD CAP

    Click here

  7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

    Click here

  8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

  9. REMOVE HOOD TO COWL TOP SEAL

    Click here

  10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

    Click here

  11. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)


    1. B001ZP5

      Detach the 3 claws and remove the washer nozzle.

    2. Disconnect the hose.

  12. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)


    1. B001ZXJ

      Detach the connector clamp and disconnect the connector.

    2. Disconnect the hose.

    3. B001ZGC

      Detach the 4 claws and remove the washer nozzle.