WASHER MOTOR(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER MOTOR & PUMP ASSEMBLY

    Tech Tips

    This check should be performed with the rear washer motor and pump assembly installed to the washer jar.


    1. A01X43ME01
      *1 Component without harness connected: (Rear Washer Motor and Pump Assembly)

      Fill the washer jar with washer fluid.

    2. Apply battery voltage to the washer motor and check the operation of the washer motor and pump assembly.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Washer motor and pump operation is normal

      If the result is not as specified, replace the rear washer motor and pump assembly.