WASHER MOTOR(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    Tech Tips

    This check should be performed with the windshield washer motor and pump installed to the washer jar.


    1. A01X54ZE01
      *1 Component without harness connected: (Windshield Washer Motor and Pump Assembly)

      Fill the washer jar with washer fluid.

    2. Apply battery voltage to the washer motor and check the operation of the washer motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Windshield washer motor operation is normal

      If the result is not as specified, replace the windshield washer motor and pump assembly.