WASHER MOTOR(for Front Side) INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01X230

      Install the washer motor together with the gasket in the direction shown in the illustration.

      Tech Tips

      Make sure the gasket is positioned as shown in the illustration.

    2. Connect the connector.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. A01XAQGE04

      Temporarily install the windshield washer jar with the 4 bolts.

    2. Tighten the 4 bolts in the order shown in the illustration to install the windshield washer jar.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    3. A01WYYNE03
      *1 w/ Headlight Cleaner System

      w/ Headlight Cleaner System:


      1. Connect the 2 connectors.

      2. Attach the clamp.

      3. Connect the headlight cleaner hose to the headlight cleaner motor and pump.

    4. w/o Headlight Cleaner System:


      1. Connect the connector.

      2. Attach the clamp.

  3. INSTALL WASHER INLET SUB-ASSEMBLY


    1. A01X5UG

      Install the washer inlet with the clip.

  4. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. A01X8SS

      Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  5. INSTALL FRONT FENDER LINER LH


    1. Install the fender liner with the 12 clips and 2 new grommets.

    2. Using a T30 "TORX" socket, install the 2 screws.

    3. Install the 2 screws.

      A01WZ58

  6. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH

    Click here

  7. INSTALL SIDE STEP ASSEMBLY LH

    Click here

  8. INSTALL FRONT FENDER MUDGUARD LH

    Click here