WASHER MOTOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  3. REMOVE SIDE STEP ASSEMBLY LH

    Click here

  4. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

    Click here

  5. REMOVE FRONT FENDER LINER LH


    1. A01X0JM

      Remove the 2 screws.

    2. A01X74Q

      Using a T30 "TORX" socket, remove the 2 screws.

    3. A01X9CR

      Remove the 2 grommets.

    4. A01XA1L

      Remove the 12 clips and front fender liner LH.

  6. DRAIN WASHER FLUID


    1. A01X5A1

      Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.

  7. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01X5UG

      Remove the clip and washer inlet.

  8. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. w/ Headlight Cleaner System:


      1. A01XBHE

        Disconnect the headlight cleaner hose.

      2. A01WZKR

        Detach the 2 clamps and disconnect the 2 connectors.

    2. w/o Headlight Cleaner System:


      1. A01X0Q2

        Detach the 2 clamps and disconnect the connector.

    3. A01X8OZ

      Disconnect the 2 washer hoses at rear portion of the windshield washer jar.

    4. A01XAQG

      Detach the 2 guides and remove the 4 bolts and windshield washer jar assembly.

  9. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the connector.

    2. A01X4XS

      Remove the windshield washer motor and pump assembly from the windshield washer jar assembly.