WASHER MOTOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  2. REMOVE SIDE STEP ASSEMBLY LH

    Click here

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

    Click here

  4. REMOVE FRONT FENDER LINER LH


    1. Remove the 2 screws.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Using a clip remover, remove the 2 grommets, 12 clips and fender liner.

      A01WZ58

  5. DRAIN WASHER FLUID


    1. A01X5A1

      Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.

  6. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01X5UG

      Using a clip remover, remove the clip and washer inlet.

  7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. A01WYYNE03
      *1 w/ Headlight Cleaner System

      w/ Headlight Cleaner System:


      1. Detach the clamp.

      2. Disconnect the 2 connectors.

      3. Disconnect the headlight cleaner hose.

    2. w/o Headlight Cleaner System:


      1. Detach the clamp.

      2. Disconnect the connector.

    3. A01XAQG

      Remove the 4 bolts. Then remove the windshield washer jar.

  8. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01X4XS

      Remove the windshield washer motor and pump assembly together with the gasket in the direction shown in the illustration.