WIPER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE LOWER STEERING COLUMN COVER


    1. for Manual Tilt and Manual Telescopic Steering Column:


      1. Remove the lower steering column cover Click here.

    2. for Power Tilt and Power Telescopic Steering Column:


      1. Remove the lower steering column cover Click here.

  2. REMOVE TILT AND TELESCOPIC SWITCH (for LHD or for RHD LH Side, for Power Tilt and Telescopic Steering Column)

    Click here

  3. REMOVE UPPER STEERING COLUMN COVER


    1. for Manual Tilt and Manual Telescopic Steering Column:


      1. Remove the upper steering column cover Click here.

    2. for Power Tilt and Power Telescopic Steering Column:


      1. Remove the upper steering column cover Click here.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01X1U9

      Disconnect the 2 connectors.

    2. A01X6A2E01
      Text in Illustration
      *a Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and remove the wiper switch.

      Note

      If the claw is pushed with excessive force, it may be broken.