REAR WIPER MOTOR(for Double Swing Out Type) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A01X145E01
      Text in Illustration
      *1 Back Door Glass Edge

      Operate the rear wiper motor assembly.

    2. Stop the rear wiper motor assembly operation.

    3. Check the automatic stop position.

      Standard Clearance
      Area Specified Condition
      A 55 to 75 mm (2.17 to 2.95 in.)

      Tech Tips

      After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.