REAR WIPER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL REAR WIPER MOTOR ASSEMBLY


    1. B001XQL

      Temporarily install the rear wiper motor assembly with the 3 bolts.

    2. Tighten the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  2. INSTALL REAR WIPER MOTOR GROMMET

    Click here

  3. INSTALL REAR WIPER ARM

    Click here

  4. INSTALL BACK DOOR GARNISH

    Click here

  5. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

    Click here

  6. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

    Click here

  7. INSTALL ASSIST GRIP (for Face to Face Seat Type)

    Click here

  8. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  9. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  10. INSTALL CENTER BACK DOOR GARNISH

    Click here