REAR WIPER MOTOR(for Double Swing Out Type) INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A01XBEJE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper continuous operation.


      1. Connect the positive (+) lead of the battery to terminal 4 (B), and the negative (-) lead to terminal 3 (L) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates continuously.

        If the result is not as specified, replace the rear wiper motor assembly.

    2. A01XBEJE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper intermittent operation.


      1. Connect the positive (+) lead of the battery to terminal 4 (B), and the negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates intermittently.

        If the result is not as specified, replace the rear wiper motor assembly.