OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

    B001ZBWE02

    1. Attach the claw and Install the mirror with the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. w/ Power Mirror Control System:


      1. Attach the clamp.

      2. Connect the connector labeled A.

  2. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH

    Click here

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  4. INSTALL DOOR ASSIST GRIP COVER LH

    Click here

  5. INSTALL FRONT UPPER ARMREST BASE PANEL LH

    Click here

  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

    Click here

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

  8. ADJUST SIDE TELEVISION CAMERA ASSEMBLY

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.