OUTER REAR VIEW MIRROR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL

    Click here

  4. REMOVE FRONT UPPER ARMREST BASE PANEL LH

    Click here

  5. REMOVE DOOR ASSIST GRIP COVER

    Click here

  6. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  8. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

    B001ZBWE02

    1. w/ Power Mirror Control System:


      1. Disconnect the connector labeled A.

      2. Detach the clamp.

    2. Remove the 3 nuts and claw.

    3. Remove the outer rear view mirror.