FUEL LID LOCK CONTROL CABLE ASSEMBLY(for RHD) INSTALLATION

PROCEDURE


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Connect the cable to the clamps shown in the illustration to install the cable.

      B001VVT

  2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. B001W0F

      Install the lock retainer and turn it clockwise as shown in the illustration.

    2. B001ZEG

      Install the cable and turn it clockwise as shown in the illustration.

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. B001ZRC

      Connect the fuel lid lock control cable to the fuel lid lock open lever.

    2. Attach the 2 claws to install the fuel lid lock open lever.

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  5. INSTALL NO. 1 REAR SEAT COVER BEZEL (w/ Rear No. 2 Seat)

    Click here

  6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    Click here

  7. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  8. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  9. INSTALL REAR STEP COVER

    Click here

  10. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  11. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  12. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  13. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.