FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

   
   

   1. Connect the cable to the clamps shown in the illustration to install the cable.

      

2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

   

   
   

   1. Install the lock retainer and turn it clockwise as shown in the illustration.

   2. 

      Install the cable and turn it clockwise as shown in the illustration.

3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

   
   

   1. 

      Connect the fuel lid lock control cable to the fuel lid lock open lever.

   2. Attach the 2 claws to install the fuel lid lock open lever.

4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Click here

5. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

   Click here

6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

   Click here

7. INSTALL FRONT FLOOR CARPET ASSEMBLY

   Click here

8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

9. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

   
   

   1. w/o Console Box Lid:

      Click here

   2. w/ Cool Box:

      Click here

   3. w/o Cool Box:

      Click here

10. INSTALL REAR NO. 2 SEAT PROTECTOR

    Click here

11. INSTALL REAR NO. 1 SEAT PROTECTOR

    Click here

12. INSTALL AIR DUCT GUIDE

    Click here

13. INSTALL AIR DUCT PLUG

    Click here

14. INSTALL AIR HEATER GUIDE

    Click here

15. INSTALL NO. 2 AIR DUCT PLUG

    Click here

16. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

17. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

18. INSTALL REAR STEP COVER

    Click here

19. INSTALL COWL SIDE TRIM BOARD LH

    Click here

20. INSTALL COWL SIDE TRIM BOARD RH

    Click here

21. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

22. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

23. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

24. INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    Click here

25. INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    Click here

26. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side)

    Click here

27. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)

    Click here

28. INSTALL REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type)

    Click here

29. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

30. INSTALL FRONT SEAT ASSEMBLY RH

    
    

    1. for Manual Seat:

       Click here

    2. for Power Seat:

       Click here

    3. for Bench Seat Type:

       Click here

31. INSTALL FRONT SEAT ASSEMBLY LH

    
    

    1. for Manual Seat:

       Click here

    2. for Power Seat:

       Click here

32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

33. CHECK SRS WARNING LIGHT

    
    

    1. Check the SRS warning light Click here.