FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. Click here

   REMOVE FRONT SEAT ASSEMBLY LH

   
   

   1. for Manual Seat:

      (Click here)

   2. for Power Seat:

      (Click here)

4. Click here

   REMOVE FRONT SEAT ASSEMBLY RH

   
   

   1. for Manual Seat:

      (Click here)

   2. for Power Seat:

      (Click here)

   3. for Bench Seat Type:

      (Click here)

5. Click here

   REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

6. Click here

   REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)

   (Click here)

7. Click here

   REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side)

   (Click here)

8. Click here

   REMOVE REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type)

   (Click here)

9. Click here

   REMOVE INSTRUMENT SIDE PANEL LH

   Click here

10. Click here

    REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    Click here

11. Click here

    REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    Click here

12. Click here

    REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

13. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

14. Click here

    REMOVE COWL SIDE TRIM BOARD LH

    Click here

15. Click here

    REMOVE COWL SIDE TRIM BOARD RH

    Click here

16. Click here

    REMOVE REAR STEP COVER

    Click here

17. Click here

    REMOVE REAR DOOR SCUFF PLATE LH

    Click here

18. Click here

    REMOVE REAR DOOR SCUFF PLATE RH

    Click here

19. Click here

    REMOVE NO. 2 AIR DUCT PLUG

    Click here

20. Click here

    REMOVE AIR HEATER GUIDE LH

    Click here

21. Click here

    REMOVE AIR DUCT PLUG

    Click here

22. Click here

    REMOVE AIR DUCT GUIDE

    Click here

23. Click here

    REMOVE REAR NO. 1 SEAT PROTECTOR

    Click here

24. Click here

    REMOVE REAR NO. 2 SEAT PROTECTOR

    Click here

25. Click here

    REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    
    

    1. w/o Console Box Lid:

       (Click here)

    2. w/ Cool Box:

       (Click here)

    3. w/o Cool Box:

       (Click here)

26. Click here

    REMOVE FRONT FLOOR CARPET ASSEMBLY

    Click here

27. Click here

    REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

28. Click here

    REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    Click here

29. Click here

    REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    Click here

30. Click here

    REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

31. Click here

    REMOVE FUEL FILLER OPENING LID LOCK RETAINER

    
    

    1. Turn the cable counterclockwise and remove the cable from the retainer.

    2. 

       Turn the lock retainer counterclockwise and remove the lock retainer.

32. Click here

    REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    
    
    1. 

       Detach the 2 claws.

    2. Disconnect the fuel lid lock control cable and remove the fuel lid lock open lever.

33. Click here

    REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    
    
    1. 

       Using a screwdriver, disconnect the clamps shown in the illustration.

       Tip:

       Tape the screwdriver tip before use.

    2. Remove the lock control cable.