POWER MIRROR CONTROL SYSTEM(w/ Retract Mirror) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List / All Data.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Mirror Selection SW (R) Mirror master switch signal for RH mirror / ON or OFF

      ON: Switch is in R position

      OFF: Switch is off or in L position

      		 -
      Mirror Selection SW (L) Mirror master switch signal for LH mirror / ON or OFF

      ON: Switch is in L position

      OFF: Switch is off or in R position

      		 -
      Mirror Position SW (R) Mirror control switch signal (right) / ON or OFF

      ON: Right switch is on

      OFF: Any switch except right is on or all switches are off

      		 -
      Mirror Position SW (L) Mirror control switch signal (left) / ON or OFF

      ON: Left switch is on

      OFF: Any switch except left is on or all switches are off

      		 -
      Mirror Position SW (Up) Mirror control switch signal (up) / ON or OFF

      ON: Up switch is on

      OFF: Any switch except up is on or all switches are off

      		 -
      Mirror Position SW (Dwn) Mirror control switch signal (down) / ON or OFF

      ON: Down switch is on

      OFF: Any switch except down is on or all switches are off

      		 -
      Outer Mirror Fold SW Mirror retract switch signal / ON or OFF

      ON: Switch is on (retracting)

      OFF: Switch is off

      		 -
      Mirror
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Mirror Memory No.1* Mirror position memorized in seat memory switch memory1 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.2* Mirror position memorized in seat memory switch memory2 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.3* Mirror position memorized in seat memory switch memory3 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      RH Mir Position Sensor V Passenger side mirror vertical sensor voltage / MIN: 0, MAX: 5 V Within range from 0 to 5 V -
      RH Mir Position Sensor H Passenger side mirror vertical sensor voltage / MIN: 0, MAX: 5 V Within range from 0 to 5 V -
      LH Mir Position Sensor V Driver side mirror vertical sensor voltage / MIN: 0, MAX: 5 V Within range from 0 to 5 V -
      LH Mir Position Sensor H Driver side mirror vertical sensor voltage / MIN: 0, MAX: 5 V Within range from 0 to 5 V -

      Tech Tips

      *: w/ Seat Position Memory System

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body Electrical / Mirror / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Mirror
      Tester Display Test Part Control Range Diagnostic Note
      RH Mirror Up/Down Mirror vertical operation UP / OFF / DOWN -
      RH Mirror Right/Left Mirror horizontal operation RIGHT / OFF / LEFT -
      LH Mirror Up/Down Mirror vertical operation UP / OFF / DOWN -
      LH Mirror Right/Left Mirror horizontal operation RIGHT / OFF / LEFT -
      Mirror Fold Mirror retract operation FOLD / OFF -
      Mirror Return Mirror retract operation RETURN / OFF -