POWER MIRROR CONTROL SYSTEM(w/ Retract Mirror) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Mirror Selection SW (R) Mirror select switch signal for RH mirror / ON or OFF

      ON: Mirror select switch is R position

      OFF: Mirror select switch is except R position

      		 -
      Mirror Selection SW (L) Mirror select switch signal for LH mirror / ON or OFF

      ON: Mirror select switch is L position

      OFF: Mirror select switch is except L position

      		 -
      Mirror Position SW (R) Mirror surface adjust switch signal (Right) / ON or OFF

      ON: Right switch on

      OFF: Any switch except right on or all switches off

      		 -
      Mirror Position SW (L) Mirror surface adjust switch signal (Left) / ON or OFF

      ON: Left switch on

      OFF: Any switch except left on or all switches off

      		 -
      Mirror Position SW (Up) Mirror surface adjust switch signal (Up) / ON or OFF

      ON: Up switch on

      OFF: Any switch except up on or all switches off

      		 -
      Mirror Position SW (Dwn) Mirror surface adjust switch signal (Down) / ON or OFF

      ON: Down switch on

      OFF: Any switch except down on or all switches off

      		 -
      Reverse Coupled Actuation Mirror Angle Revers shift-linked mirror position memorization function setting / Default Setting or User Setting Customized value displayed -
      Mem SW NO. w/KeyID1 Switch linked with key ID1 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID1

      MEM SW1: M1 linked with key ID1

      MEM SW2: M2 linked with key ID1

      MEM SW3: M3 linked with key ID1

      		 -
      Mem SW NO. w/KeyID2 Switch linked with key ID2 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID2

      MEM SW1: M1 linked with key ID2

      MEM SW2: M2 linked with key ID2

      MEM SW3: M3 linked with key ID2

      		 -
      Mem SW NO. w/KeyID3 Switch linked with key ID3 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID3

      MEM SW1: M1 linked with key ID3

      MEM SW2: M2 linked with key ID3

      MEM SW3: M3 linked with key ID3

      		 -
      Mem SW NO. w/KeyID4 Switch linked with key ID4 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID4

      MEM SW1: M1 linked with key ID4

      MEM SW2: M2 linked with key ID4

      MEM SW3: M3 linked with key ID4

      		 -
      Mem SW NO. w/KeyID5 Switch linked with key ID5 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID5

      MEM SW1: M1 linked with key ID5

      MEM SW2: M2 linked with key ID5

      MEM SW3: M3 linked with key ID5

      		 -
      Mem SW NO. w/KeyID6 Switch linked with key ID6 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID6

      MEM SW1: M1 linked with key ID6

      MEM SW2: M2 linked with key ID6

      MEM SW3: M3 linked with key ID6

      		 -
      Mem SW NO. w/KeyID7 Switch linked with key ID7 / NONE, MEM SW1, MEM SW2 or MEM SW3

      NONE: No switches linked with key ID7

      MEM SW1: M1 linked with key ID7

      MEM SW2: M2 linked with key ID7

      MEM SW3: M3 linked with key ID7

      		 -
      Outer Mirror Fold SW Retractable outer mirror switch signal / ON or OFF

      ON: Retractable outer mirror switch in retract position

      OFF: Retractable outer mirror switch not in retract position

      		 -
      Auto Mirror SW Retractable outer mirror switch signal / ON or OFF

      ON: Retractable outer mirror switch in auto position

      OFF: Retractable outer mirror switch not in auto position

      		 -
      Mirror L
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch1 Seat memory switch M1 switch signal / ON or OFF

      ON: Seat memory switch M1 switch on

      OFF: Seat memory switch M1 switch off

      		 -
      Seat Memory Switch2 Seat memory switch M2 switch signal / ON or OFF

      ON: Seat memory switch M2 switch on

      OFF: Seat memory switch M2 switch off

      		 -
      Seat Memory Switch3 Seat memory switch M3 switch signal / ON or OFF

      ON: Seat memory switch M3 switch on

      OFF: Seat memory switch M3 switch off

      		 -
      Seat Memory Set SW Seat memory switch SET switch signal / ON or OFF

      ON: Seat memory switch SET switch on

      OFF: Seat memory switch SET switch off

      		 -
      Mirror Memory No.1 Mirror position memorized in seat memory switch 1 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.2 Mirror position memorized in seat memory switch 2 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.3 Mirror position memorized in seat memory switch 3 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.4 Mirror position memorized in seat memory switch 4 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory No.5 Mirror position memorized in seat memory switch 5 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory No.6 Mirror position memorized in seat memory switch 6 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory (Rev) No.1 Reverse shift-linked mirror position memorized in seat memory switch 1 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory (Rev) No.2 Reverse shift-linked mirror position memorized in seat memory switch 2 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory (Rev) No.3 Reverse shift-linked mirror position memorized in seat memory switch 3 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Vertical Sensor Vol Vertical mirror position / 0 to 5 V Within range from 0 to 5 V -
      Mirror Horizontal Sensor Vol Horizontal mirror position / 0 to 5 V Within range from 0 to 5 V -
      Mirror Fold Detect Condition of retractable outer mirror / Error or Normal

      Error: Retractable outer mirror is malfunctioning

      Normal: Retractable outer mirror is normal

      		 Only item displayed (not supported)
      +B Voltage Input Value Power supply for outer mirror control ECU assembly / 0 to 25.5 V 11 to 14 V -
      # Codes Number of trouble codes / 0 to 255 Number of stored DTCs displayed -
      Mirror R
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch1 Seat memory switch M1 switch signal / ON or OFF

      ON: Seat memory switch M1 switch on

      OFF: Seat memory switch M1 switch off

      		 Only item displayed (not supported)
      Seat Memory Switch2 Seat memory switch M2 switch signal / ON or OFF

      ON: Seat memory switch M2 switch on

      OFF: Seat memory switch M2 switch off

      		 Only item displayed (not supported)
      Seat Memory Switch3 Seat memory switch M3 switch signal / ON or OFF

      ON: Seat memory switch M3 switch on

      OFF: Seat memory switch M3 switch off

      		 Only item displayed (not supported)
      Seat Memory Set SW Seat memory switch SET switch signal / ON or OFF

      ON: Seat memory switch SET switch on

      OFF: Seat memory switch SET switch off

      		 Only item displayed (not supported)
      Mirror Memory No.1 Mirror position memorized in seat memory switch 1 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.2 Mirror position memorized in seat memory switch 2 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.3 Mirror position memorized in seat memory switch 3 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.4 Mirror position memorized in seat memory switch 4 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory No.5 Mirror position memorized in seat memory switch 5 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory No.6 Mirror position memorized in seat memory switch 6 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 Only item displayed (not supported)
      Mirror Memory (Rev) No.1 Reverse shift-linked mirror position memorized in seat memory switch 1 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory (Rev) No.2 Reverse shift-linked mirror position memorized in seat memory switch 2 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory (Rev) No.3 Reverse shift-linked mirror position memorized in seat memory switch 3 / ON or OFF

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Vertical Sensor Vol Vertical mirror position / 0 to 5 V Within range from 0 to 5 V -
      Mirror Horizontal Sensor Vol Horizontal mirror position / 0 to 5 V Within range from 0 to 5 V -
      Mirror Fold Detect Condition of retractable outer mirror / Error or Normal

      Error: Retractable outer mirror is malfunctioning

      Normal: Retractable outer mirror is normal

      		 Only item displayed (not supported)
      +B Voltage Input Value Power supply for outer mirror control ECU assembly / 0 to 25.5 V 11 to 14 V -
      # Codes Number of trouble codes / 0 to 255 Number of stored DTCs displayed -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Mirror / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Mirror
      Tester Display Test Part Control Range Diagnostic Note
      RH Mirror Up/Down Mirror vertical operation Up / OFF / Down -
      RH Mirror Right/Left Mirror horizontal operation Right / OFF / Left -
      LH Mirror Up/Down Mirror vertical operation Up / OFF / Down -
      LH Mirror Right/Left Mirror horizontal operation Right / OFF / Left -
      Mirror Fold Mirror retract operation ON / OFF -
      Mirror Return Mirror retract operation ON / OFF -