POWER BACK DOOR TOUCH SENSOR INSPECTION

PROCEDURE


  1. INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A01X95IE03
      Text in Illustration
      *a

      Component without harness connected

      (Power Back Door Sensor Assembly LH)
      *b Pressed
      *c Not Pressed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1(OSL) - 2(OSLE) Not pressed Approximately 1 kΩ
      Pressed Below 100 Ω

      If the result is not as specified, replace the power back door sensor assembly LH.

  2. INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH


    1. A01X95IE04
      Text in Illustration
      *a

      Component without harness connected

      (Power Back Door Sensor Assembly RH)
      *b Pressed
      *c Not Pressed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1(OSR) - 2(OSRE) Not pressed Approximately 1 kΩ
      Pressed Below 100 Ω

      If the result is not as specified, replace the power back door sensor assembly RH.