BACK DOOR OPENER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE

1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

   
   

   1. Connect the connector.

   2. Install the back door opener switch assembly with the 2 screws.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

2. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

   
   

   1. Attach the 2 claws to install the door opening switch sub-assembly.

3. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

   Click here

4. INSTALL ASSIST GRIP (for Face to Face Seat Type)

   Click here