BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. A01WZLLE15

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (UL) - 2 (L) Lock switch Pushed Below 1 Ω

      1 (UL) - 2 (L)

      3 (B) - 2 (L)

      		 Not pushed 10 kΩ or higher
      3 (B) - 2 (L) Open switch Pushed Below 1 Ω

      • If the result is not as specified, replace the back door opener switch assembly.

  2. INSPECT DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A01XBXPE04
      *1 Component without harness connected: (Door Opening Switch Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (E) - 2 (B) Not pushed 10 kΩ or higher
      1 (E) - 2 (B) Pushed Below 1 Ω