HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER


    1. for Standard:

      Click here

    2. w/ Winch:

      Click here

  2. REMOVE FRONT FENDER MAIN SEAL LH (for LHD)


    1. A01X50X

      Using a clip remover, detach the 3 clips and remove the front fender main seal LH.

  3. REMOVE FRONT FENDER MAIN SEAL RH (for RHD)


    1. A01X2MK

      Using a clip remover, detach the 3 clips and remove the front fender main seal RH.

  4. REMOVE LOWER NO. 1 RADIATOR MOUNTING BRACKET


    1. A01X010

      Remove the bolt and lower No. 1 radiator mounting bracket.

  5. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A01X88GE03
      *1 for LHD:
      *2 for RHD:

      Remove the 3 screws.

    2. Detach the claw and remove the hood lock control cable cover.

  6. REMOVE HOOD LOCK ASSEMBLY


    1. A01X0HYE03
      *1 for LHD:
      *2 for RHD:

      Remove the 2 bolts and nut.

    2. Remove the hood lock assembly.

    3. Disconnect the connector.

    4. A01X404E03
      *1 for LHD:
      *2 for RHD:

      Disconnect the hood lock control cable assembly.

  7. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01X137

      Detach the 2 claws.

    2. Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  8. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

    A01X5WDE10
    Text in Illustration
    *a Clamp - -

    1. Using a screwdriver, disconnect the 6 clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.

  9. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

    A01X9BOE03
    Text in Illustration
    *a Clamp - -

    1. Using a screwdriver, disconnect the 6 clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.