CUSTOMIZING FUNCTION WITH GTS
Tech Tips
The following item can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Utility / Customize Setting / PSD&PBD operation.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
|---|---|---|---|
| PBD SW Operation | 0.8 s | Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 seconds. | 0.8s or ON |
| PBD Buzzer | OFF | Function that makes the power back door buzzer sound when power back door is operating | ON or OFF |
| PBD Assist Open Operation | ON | Function that enables or disables the power back door assist open operation. When PBD Assist Open Operation is set to on (enabled) the back door will open automatically when the back door opener switch (opener switch) is operated. | ON or OFF |
| Door Unlock with 1 Motion.*1 | Back Door | Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pushed to operate the power back door. | Back Door or ALL DOORS |
| Wireless PBD Open*2 | Lock:OFF/Unlock:0.8s | Function that opens the back door when the transmitter switch is pressed with the back door unlocked. | Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8s |
Tech Tips
*1: "ALL DOORS" is only available for vehicles with the wireless one motion function.
*2: "Lock:Twice/Unlock:Twice" and "Lock:0.8s/Unlock:0.8s" are only available for vehicles with the wireless one motion function.