POWER BACK DOOR SYSTEM Power Back Door Warning Buzzer Circuit

DESCRIPTION

The power back door unit assembly (power back door ECU) receives the power back door ON/OFF switch signal to sound the power back door warning buzzer.

WIRING DIAGRAM

B001XUDE05
*a Power Back Door Warning Buzzer
*b Power Back Door Unit Assembly (Power Back Door ECU)

PROCEDURE


  1. PERFORM ACTIVE TEST USING GTS (PBD BUZZER)


    1. Select the Active Test, use the GTS to generate a control command, and check that the power back door warning buzzer sounds Click here.

      Back Door
      Tester Display Test Part Control Range Diagnostic Note
      PBD Buzzer Operate warning buzzer ON / OFF -
      OK
      Power back door warning buzzer sounds normally.

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    NG

  2. CHECK HARNESS AND CONNECTOR (POWER BACK DOOR WARNING BUZZER - POWER BACK DOOR UNIT ASSEMBLY AND BODY GROUND)


    1. Disconnect the K47 power back door warning buzzer connector.

    2. Disconnect the L52 power back door unit assembly connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      K47-1 - L52-26 (BZR+) Always Below 1 Ω
      K47-2 - Body ground Always Below 1 Ω
      K47-1 - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  3. REPLACE POWER BACK DOOR WARNING BUZZER


    1. Temporarily replace the power back door warning buzzer with a new or normally functioning one Click here.


    NEXT

  4. PERFORM ACTIVE TEST USING GTS (PBD BUZZER)


    1. Select the Active Test, use the GTS to generate a control command, and check that the power back door warning buzzer sounds Click here.

      Back Door
      Tester Display Test Part Control Range Diagnostic Note
      PBD Buzzer Operate warning buzzer ON / OFF -
      OK
      Power back door warning buzzer sounds normally.

    OK

    END (POWER BACK DOOR WARNING BUZZER IS DEFECTIVE)

    NG

    REPLACE POWER BACK DOOR UNIT ASSEMBLY Click here