WINDSHIELD DEICER SYSTEM TERMINALS OF ECU


  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (w/ Rear Heater)

    A01X87DE05

    1. Disconnect the E36 air conditioning amplifier assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      E36-5 (IG+) - E36-1 (GND) G - BR Power source (IG) Ignition switch ON 11 to 14 V
      Ignition switch off Below 1 V
      E36-6 (+B1) - E36-1 (GND) LG - BR Power source Always 11 to 14 V
      E36-7 (+B2) - E36-1 (GND) LG - BR Power source Always 11 to 14 V
      E36-1 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω

      • If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the E36 air conditioning amplifier assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      E36-9 (FDEF) - E36-1 (GND) GR - BR Deicer relay Ignition switch ON and deicer switch off 11 to 14 V
      Ignition switch ON and deicer switch on Below 1 V

  2. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (w/o Rear Heater)

    A01XABDE02

    1. Disconnect the E81 air conditioning amplifier assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      E81-1 (IG+) - E81-14 (GND) G - BR Power source (IG) Ignition switch ON 11 to 14 V
      Ignition switch off Below 1 V
      E81-21 (+B1) - E81-14 (GND) LG - BR Power source Always 11 to 14 V
      E81-14 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω

      • If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the E81 air conditioning amplifier assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      E81-39 (FDEF) - E81-14 (GND) GR - BR Deicer relay Ignition switch ON and deicer switch off 11 to 14 V
      Ignition switch ON and deicer switch on Below 1 V

  3. CHECK AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

    A01X6W7E02

    1. Disconnect the F10 air conditioning control assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      F10-7 (IG+) - F10-1 (GND) B - W-B Power source (IG) Ignition switch ON 11 to 14 V
      Ignition switch off Below 1 V
      F10-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

      • If the result is not as specified, there may be a malfunction on the wire harness side.

  4. MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

  5. MULTI-DISPLAY ASSEMBLY Click here