REAR POWER WINDOW SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR UPPER ARMREST BASE PANEL LH


    1. A01X4JI

      Using a moulding remover, detach the 7 claws.

    2. Disconnect the connector and remove the rear door upper armrest base panel assembly LH.

  2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01X6UN

      Detach the 2 claws and remove the rear power window regulator switch assembly.