POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only) UTILITY


  1. CLEAR WINDOW POSITION DATA (Using GTS)

    Note

    If "Reset Memory" is performed, DTC B2313 will be output.


    1. Turn the engine switch off.

    2. Connect the GTSto the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTSon.

    5. Enter the following menus: Body Electrical / D-Door Motor / Utility / Reset Memory.

    6. Select the "Reset Memory" to clear the window position data using the GTS.