FRONT CONSOLE BOX(w/o Cool Box) REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A01X46HE05
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 7 claws and remove the panel cushion.

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01X92E

      Remove the clip.

    2. Remove the screw.

    3. Detach the 8 claws.

    4. Remove the panel pad and disconnect the connectors and 2 clamps.

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A01XBYUE01
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 7 claws and remove the panel cushion.

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01X1XU

      Remove the clip.

    2. Remove the screw.

    3. Detach the 7 claws and remove the panel.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

      A01X0ZSE01
      *1 for Automatic Transmission:
      *2 for Manual Transmission:

  6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01XBUZ

      Detach the 7 claws.

    2. Disconnect the connectors and remove the panel.

  7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01X0M8

      Detach the 9 claws and remove the panel.

  8. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01XAY8

      Detach the 4 claws and remove the box.

  9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01XAGK

      Detach the 14 claws.

    2. Disconnect the connectors and remove the console panel.

  10. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01X0KHE01
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 8 claws.

    3. Remove the end panel and disconnect the connectors and 2 clamps.

  11. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    A01X6L0

    1. Remove the 4 bolts and 2 screws.

    2. Detach the 2 claws and remove the console box.