FRONT CONSOLE BOX(w/ Cool Box) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)

    Click here

  4. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  7. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Click here

  8. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  10. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  11. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

    Click here

  12. REMOVE UPPER CONSOLE PANEL

    Click here

  13. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  14. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  15. REMOVE NO. 1 COOLER COVER


    1. A01X92O

      Detach the clamp on the lower part of the cooler cover, and then pull the cooler cover upward to remove it.

  16. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    Click here

  17. REMOVE TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)

    Click here

  18. REMOVE NO. 1 TELEPHONE BRACKET (w/ Telematics Transceiver)

    Click here

  19. REMOVE COOLING BOX ASSEMBLY

    A01XB90

    1. Remove the 4 bolts and 2 screws.

    2. Remove the 2 bolts and disconnect the 2 cooler pipes.

    3. Remove the 2 O-rings from the 2 cooler pipes.

    4. Disconnect the connector.

    5. Detach the 2 claws and remove the cooling box assembly.