FRONT CONSOLE BOX(w/ Cool Box) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)


    1. Remove the front seat assembly LH Click here.

  3. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)


    1. Remove the front seat assembly LH Click here.

  4. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A01X46HE04
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 7 claws and remove the panel cushion.

  5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01X92E

      Remove the clip.

    2. Remove the screw.

    3. Detach the 8 claws.

    4. Remove the panel pad and disconnect the connectors and 2 clamps.

  6. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION


    1. A01XBYUE01
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 7 claws and remove the panel cushion.

  7. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01X1XU

      Remove the clip.

    2. Remove the screw.

    3. Detach the 7 claws and remove the panel.

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

      A01X0ZSE01
      *1 for Automatic Transmission:
      *2 for Manual Transmission:

  9. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01XBUZ

      Detach the 7 claws.

    2. Disconnect the connectors and remove the panel.

  10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01X0M8

      Detach the 9 claws and remove the panel.

  11. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01XAY8

      Detach the 4 claws and remove the box.

  12. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01XAGK

      Detach the 14 claws.

    2. Disconnect the connectors and remove the console panel.

  13. REMOVE NO. 1 COOLER COVER


    1. A01X92O

      Detach the clamp on the lower part of the cooler cover, and then pull the cooler cover upward to remove it.

  14. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01X0KHE01
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 8 claws.

    3. Remove the end panel and disconnect the connectors and 2 clamps.

  15. REMOVE COOLING BOX ASSEMBLY

    A01XB90

    1. Remove the 4 bolts and 2 screws.

    2. Remove the 2 bolts and disconnect the 2 cooler pipes.

    3. Remove the 2 O-rings from the cooler pipes.

    4. Disconnect the connector.

    5. Detach the 2 claws and remove the cooling box.