FRONT CONSOLE BOX(w/o Console Box Lid) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01X160E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    A01X8CF

    1. Remove the clip and screw.

    2. Detach the 8 claws.

    3. Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.

  4. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01XBYUE02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 1 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 7 claws and remove the No. 1 instrument panel finish panel cushion.

  5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A01X1XU

    1. Remove the clip and screw.

    2. Detach the 7 claws and remove the lower instrument panel pad sub-assembly.

  6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A01X4PF

    1. Detach the 7 claws.

    2. Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.

  7. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    1. Put protective tape around the upper No. 2 console panel garnish.

    2. Using a screwdriver, detach the 8 claws and remove the upper No. 2 console panel garnish.

      Tech Tips

      Tape the screwdriver tip before use.

      A01X1WJE01
      Text in Illustration
      *A for Separate Seat Type *B for Bench Seat Type
      *1 Protective Tape - -

  8. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    A01X0V9E02
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the upper No. 1 console panel garnish.

    2. Using a screwdriver, detach the 8 claws and remove the upper No. 1 console panel garnish.

      Tech Tips

      Tape the screwdriver tip before use.

  9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Put protective tape around the rear upper console panel sub-assembly.

    2. Using a moulding remover, detach the 12 claws and remove the rear upper console panel sub-assembly.

      A01X7X8E01
      Text in Illustration
      *1 Protective Tape - -

  10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A01X3JO

    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

  11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    A01X7R4E01

    1. Put protective tape around the upper console panel sub-assembly.

    2. Using a moulding remover, detach the 8 claws and remove the upper console panel sub-assembly.

  12. REMOVE LOWER CONSOLE BOX

    A01X9SW

    1. Remove the 2 screws and 4 bolts.

    2. Detach the 2 claws and remove the lower console box.