INSTRUMENT PANEL SAFETY PAD REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

      A01XA8M

  2. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

      A01X7WE

  3. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

    Click here

  4. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

    Click here

  5. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)

    Click here

  6. INSTALL NO. 2 SIDE DEFROSTER NOZZLE


    1. A01WZWH

      Attach the 3 claws to install the No. 2 side defroster nozzle.

  7. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01X2DP

      Attach the 2 claws to install the No. 1 side defroster nozzle.

  8. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01X4FF

      Attach the 11 claws to install the defroster nozzle.

  9. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    Click here

  10. INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct)


    1. A01X5D4

      Install the rear No. 1 air duct with the 2 screws.

  11. INSTALL CENTER HEATER TO REGISTER DUCT


    1. A01X2PI

      Install the center heater to register duct with the 3 screws.