INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CENTER HEATER TO REGISTER DUCT


    1. A01X2PI

      Remove the 3 screws and center heater to register duct.

  2. REMOVE REAR NO. 1 AIR DUCT (w/ Rear Air Duct)


    1. A01X5D4

      Remove the 2 screws and rear No. 1 air duct.

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

    Click here

  4. REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. A01X4FF

      Detach the 11 claws and remove the defroster nozzle.

  5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE


    1. A01X2DP

      Detach the 2 claws and remove the No. 1 side defroster nozzle.

  6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE


    1. A01WZWH

      Detach the 3 claws and remove the No. 2 side defroster nozzle.

  7. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)

    Click here

  8. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

    Click here

  9. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

    Click here

  10. REMOVE NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.

      A01XA8M

  11. REMOVE NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.

      A01X7WE