WIRELESS CHARGING SYSTEM TERMINALS OF ECU
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| E150-1 (PGND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| E150-3 (ACC) - Body ground | BE - Body ground | Power source (ACC) | Power switch on (ACC) | 11 to 14 V |
| Power switch off | Below 1 V | |||
| E150-4 (B+) - Body ground | V - Body ground | Power source (+B) | Power switch off | 11 to 14 V |
| E150-5 (DIS) - Body ground | P - Body ground | Entry and start system status signal | Within 1 second after turning power switch from off to on (ACC)*1 | 4.5 to 6.0 V |
| When charging | Below 1 V | |||
| When charging is temporarily stopped by charging stop signal from certification ECU (smart key ECU assembly)*2 | 4.5 to 6.0 V | |||
| E150-7 (TAIL) - Body ground | G - Body ground | Illumination signal | Headlight dimmer switch assembly off | Below 1 V |
| Headlight dimmer switch assembly set to TAIL or HEAD | 11 to 14 V |
*1: When the power switch is turned from off to on (ACC), the mobile wireless charger cradle assembly checks the charging stop signal for 1 second. If the charging stop signal is not 4 V or higher for 0.8 seconds or more within 1 second continuously, the mobile wireless charger cradle assembly determines that there is an open circuit in the charging stop signal circuit, blinkes the indicator amber (pattern 1), and stops operation until the next time the power switch is turned on (ACC).
*2: For the certification ECU (smart key ECU assembly) charging stop signal reception conditions, Click here