RELAY(for Magnet Clutch Control) ON-VEHICLE INSPECTION

PROCEDURE


  1. REMOVE MAGNET CLUTCH RELAY

    A01X7DU

    1. Remove the magnet clutch relay from the engine room relay block.

  2. INSPECT MAGNET CLUTCH RELAY

    A01XBUTE97

    1. Measure the resistance of the magnet clutch relay.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminal 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the relay.

  3. INSTALL MAGNET CLUTCH RELAY

    A01X7DU

    1. Install the magnet clutch relay to the engine room relay block.